#146E: The mechanical „perpetual motion” device which rotates infinitively on principles of the so-called „Coriolis effect”:

Motto: „Totalizm teaches, that our physical world was intentionally created in such a manner, that ‚everything that humans can think of, humans can also accomplish’ – only that someone must firstly find a manner how to realise it.” (See subsection #I5.4.2 from volume 5 of monograph [1/5].)
       If an excellently balanced heavy flywheel with good bearings is positioned so that its axis of rotation is parallel to the axis of the Earth’s rotation, then the Earth is to revolve in relation to this flywheel, while the so-called „Coriolis effect” is to maintain the flywheel in a motionless position in relation to the rest of the universe (e.g. in relation to the entire Solar system). In the result, for a witness who stands on the Earth next to this flywheel, the wheel is going to behave like a „perpetual motion” device which makes one revolution per each day (or a revolution by 15 degrees each hour). Thus, if someone places a marker on the circumference of such a flywheel, then its perpetual rotations can be noticed visually even without the use of any gearbox which would multiply the speed of its slow rotational motion. This flywheel is also able to generate a small amount of the thrust torque. This thrust torque is equal to the momentum of inertia of the wheel itself, minus the momentum of friction on its bearings, and minus the drag momentum caused by imperfections in the gravitational balancing of the flywheel and in positioning of the axis of rotation perpendicularly to the Earth’s axis of rotation. Thus, the thrust torque that is generated by this flywheel is able to generate small amount of useful energy, e.g. small amount of electricity.
       Such a heavy flywheel with good bearings is to constitute a most simple for constructing, although highly illustrative kind of perpetual motion (PM) device that generates mechanical energy in the form of everlasting rotational movement. As such, it is going to have an immense historical significance. It will also generate a breakthrough in the human thinking about generators of free energy and about ideas of „perpetual motion”. After all, it will prove that both, such generators of free energy, as well as perpetual motion devices, are possible to be build after all, and in fact they generate energy completely for free. In this way the flywheel is going to disclose the intentional misleading hidden behind claims of the official human science that such devices can never be build.
       In 2004 I visited a tower from the Basilica in Frombork (Poland). This tower is famous because it was in it that the Polish astronomical genius, Miko³aj Kopernik (Nicolas Copernicus) used to work. During the time of my visit, this tower was turned into a museum of the physical-astronomical character. An exhibit from this museum that especially attracted my attention was a massive pendulum which illustrated the action of so-called „Coriolis effect”. Namely, the pendulum was made to swing infinitively. However, apart from the swinging motion, it also displayed the rotary motion. The rotational velocity of this rotary motion amounted to just one rotation per day. In order to sustain its swinging, the pendulum was continually supplied with energy impulses. But it did NOT receive any energy to sustain its rotary motion. This means, that the rotary motion was sustained by the energy that it received from the „Coriolis effect”. In other words, that pendulum from the tower in the Frombork’s Basilica was a first prototype that illustrated the principle of the perpetually rotating flywheel described here. Only that, because this pendulum carried out two kinds of motion simultaneously, it make impossible the interception of energy from it, that was supplied by the Coriolis effect. But the flywheel described here makes possible, and even easy, the interception of this energy. Also the flywheel does NOT require any energy supply. Thus in fact it is a good example of a so-called „perpetual motion” (PM) device.
       On the basis of that pendulum from Frombork, which rotated continually just by itself upon the action of the Coriolis effect, already now we can conclude, that the mechanical „perpetual motion” (PM) described here must also work in practice. After all, the action of the Coriolis effect is confirmed on countless number of cases, not just only on the case of that pendulum from Frombork. Unfortunately, the PM described here is not much useful in practice as a source of free energy, because of its small thrust torque and highly awkward rotational velocity that amounts to just a single rotation per day. (The thrust torque of the flywheel described here is relatively small, because equal to just a momentum of inertia of it, minus the momentum of friction on its bearings, and minus the breaking momentum which originates from imperfections in the balancing and in the precision of pointing the axis of rotation.) However, in spite of its small practical usefulness, this flywheel still is worth of building, because of its awareness, psychological, educational, and inspirational values.
       Of course, as every other „perpetual motion” device, such a flywheel rotated by the action of the Coriolis effect will have a huge value as a technological curiosity and as an illustration for the correctness of the idea for this kind of devices. After all, its everlasting rotations by 15 degrees each hour, and by 1 rotation each day, will prove to everyone who is to see it, that perpetual motion devices can be build after all, and that our science to date, as usual, also this time was at wrong when it declared categorically that such devices will NEVER work.
       Just for this reason I personally suggested that such a perpetually rotating flywheel is installed in the future museum of free and renewable energy in Wszewilki (or in Milicz). The organising such a museum I am lobbying inhabitants of these settlements for quite a time. My proposals as to what generators of free energy should be exhibited in such a museum from Wszewilki, are described in item #F4.1 from the update of the web page „wszewilki_jutra_uk.htm” (about dreams of better future for the village of Wszewilki) dated 27 February 2008, or later.
       The usefulness of the flywheel described here as a highly educational exhibit for any possible museum, is also increased by the fact, that this flywheel can be build by local tradesmen for practically every museum. Thus, with a bit of local patriotism, such a flywheel can be completed in there either completely free of charge as the altruistic deed of local tradesmen, or just for a small cost that would cover prices of materials.
       The construction of the perpetually rotating flywheel described here is relatively simple. It suffices to recover from a junkyard an old flywheel together with the permanent axel to which it is attached, or retrieve any heavy wheel (with an axel) that is well balanced – e.g. a large railway wheel. Then this flywheel needs to be supplied in good bearings so that its axel is parallel to the axis of Earth’s rotation. For this, the axis of its rotation should be positioned exactly along the line of geographical south-north, and also this axis should be slanted vertically by the angle that is equal to the geographical latitude of the place in which this flywheel is to be assembled. For example, for such flywheels assembled on the territory of Poland, the angle of their slanting towards horizontal should amount somewhere between 49 and 55 degrees – depending on the exact location of the place in which someone is going to build it. After it is assembled, the flywheel needs to be check for its precise balancing in the angular positioning, and for the easiness of its rotations. If it is balanced precisely and easily rotating, any marking made on its circumference is going to indicate that this flywheel in fact does rotate all by itself by one rotation per each full day.
       For a better illustration of the actual rotations of the flywheel described here, the axel that rotates together with it can be coupled with a multiplying gearbox for a „flywheel pointer”. The function of such a multiplying gearbox can be performed by a mechanism that is dismantled from an old and unused clock. This is because mechanisms of such old clocks frequently were constructed for the gear ratio 1:1440 (1440 = 24×60). Thus, when a single rotation per day is supplied at the input to the multiplying gearbox with such a ratio, then one rotation per minute is received at the exit from it. This means that the „flywheel pointer” (preferably of a large size) attached to the exit from such a multiplying gearbox, is going to rotate with the speed clearly noticeable to human eyes. The rotational velocity of such a „flywheel pointer” would be equal to the speed with which in present watches rotates the pointer of seconds.
       Of course, the biggest challenge for the builders of such flywheel would be to transform it into an electricity generator. After all, in order to be able to operate as an electricity generator, it needs to be supplied into a gearbox which its just one revolution per day would multiply into some useful rotations which would be able to generate electricity. Fortunately, this challenge is purely theoretical, as the energy efficiency of such a single flywheel is so small, that it is NOT worth of effort to turn it into an energy generator. Thus such a change into an electricity generator would only have a value as a proof which documents to everyone that this flywheel is in fact able to generate free electricity – in spite that the official human science claimed categorically that such generation of free electricity is absolutely impossible. But the amount of electricity that it would generate in practice would be too small in order to justify its practical application for an industrial scale. However, the illustrative proving that this flywheel generates some free electricity after all, would have an inspiring value. This is because it would motivate people to seek other principles of operation for perpetual motion devices, which would be able to generate much higher amounts of electrical energy.
       In order to enable such a perpetually rotating flywheel to propel a small generator of electricity, a large multiplying gearbox would need to be coupled with the axel of it. This gearbox would need to multiply one rotation per day of the flywheel, into at least one rotation per second of the rotor of the electricity generator. This means that such a gearbox would need to have the multiplying gear ratio of at least 1:86400. This in turn means, that if such a multiplying gearbox is based on mechanical principles of operation – as this was done in old clocks, then only its loses for friction would consume an entire thrust torque generated by the flywheel. Also in practice such a gearbox would typically self-jam and thus it would be unable to carry out the motion because of its inner friction. In turn a possible hydraulic device would have larger leaks than the output from the pumping efficiency generated by the motion of this flywheel.
       To summarise, although as a useful source of free energy, the single flywheel working in the way described above is rather of no much use. However, in my opinion it still has a revolutionary significance. After all, it illustratively proves that in fact there are principles of operation which are able to supply perpetual motion to people for free. Thus the flywheel constitutes a visual proof for the correctness of the idea of perpetual motion devices. Furthermore, it supplies a starting device for future working out the entire systems of such flywheels which are to yield energy more efficiently. As such, the single flywheel described here has immense significance as a historical and museum curiosity, as a teaching aid, as a source of inspiration which is to drive further searches for more useful principles of operation for perpetual motion devices, and as a breakthrough in our thinking.
       In order the flywheel described here works as a perpetual motion device, its axis of rotation must be exactly parallel to the axis of rotation of the Earth. This requirement, although very elementary, in fact make impossible an accidental invention of this flywheel. After all, practically almost all flywheels which people constructed so-far, have their axes of rotation positioned horizontally. So in spite that people built many of such flywheels already in the first stage of implementation of steam and combustion engines, in fact almost none of them worked in the positioning that would convert it into a perpetual motion device. After all, in order any of these flywheels with a horizontal axis of rotation worked as a perpetual motion device, it would need to be located exactly on the equator of the Earth, and its axis of rotation would need to be pointed exactly along the line south-north. However, along the Earth’s equator almost NO civilisation centres are located in which first steam or combustion engines with flywheels would be placed. So users of these first engines had NO opportunity to accidentally witness work of such flywheels as perpetual motion devices. Thus in fact humanity never obtained a chance for an accidental discovery that flywheels can work as perpetual motion devices.
       In item #B1.2 of the web page „free_energy.htm” it was explained, that in order „perpetual motion” devices can be transformed into generators of free energy, one needs to form in them the „energy feedback loop”. This feedback would loop a part of energy which they generate at the exit, feeding this energy back into their entrance, thus „multiplying” their entire energy yield. In a single flywheel described before the formation of such a feedback is impossible. But if one combines together an entire system of such flywheels, which is to contain several of them, then the „energy feedback loop” can be accomplished in this system. Let us now consider how this can be achieved.
       The momentum of inertia is a first quantity which allows us to form easily the „energy feedback loop” in a larger system of flywheels similar to the flywheel described before. In turn, as we know from item #F1 above, this momentum of inertia influences linearly the amount of energy generated by a given flywheel or by a given system of flywheels. Means, the higher the momentum of inertia, the more free energy one is able to harvest from it. In turn the increase the momentum of inertia can be accomplished on two different manners. One of these manners depends on the increase of the mass of a given flywheel – and this is rather a clumsy manner. After all, in order to generate a reasonable amount of useful free energy such a flywheel would need to be massive and weight many tons. Another, more „elegant” manner of the increase of its momentum of inertia depends on the use of so-called „gyroscopic effect”. In turn this effect is to increase the momentum of inertia of the flywheel discussed here, if this flywheel instead of being constructed as a single massive wheel, is rather build in a segmented manner as a system of several smaller flywheels which mutually increase their rotational velocity. (We must remember that in fact the Earth rotates in relation to these wheels, not these wheels rotate in relation to the Earth.) Of course, such a gyroscopic system still must be perfectly balanced, so that it will NOT form a gravitational momentum of resistance. What even interesting, with such a segmental design of the well-balanced flywheel described here, the rotational velocity of its composite wheels (the ones which generate the gyroscopic effect) can be forwarded to their input through the energy feedback loop from their output. Thus such a systems will „multiply” by itself the energy that it is to generate.
       Another quantity which could also make it possible to form „energy feedback loop” in the entire system of flywheels, is the capability to intercept the Coriolis effect during the rotations. Namely, the behaviour of water in fast rivers suggests that the Coriolis effect is able to act on flywheels that already rotate. (Of course, whether in reality this happens, it is going to be revealed by experiments after constructing first such flywheels.) This practically means, that several flywheels could be coupled together into cascades via coupling gears. In these cascades, the first flywheel, which would be the flywheel described before – that revolves once per day, would propel via a coupling gear a next flywheel that would rotate much faster, but still would intercept the Coriolis effect, and this one in turn would propel still another flywheel via a coupling gear, etc., etc. In the result, the last flywheel in this cascade, would already have the rotational velocity able to propel effectively an electricity generator, while the thrust momentum of it would be equal to the sum of thrust momentums of all flywheels of the cascade. Thus, such a cascade would provide the velocity feedback loop. Means it would make possible to harvest the output velocity from a first flywheel and feed it as an input velocity of a next flywheel.
       If the Coriolis effect allows to form such cascades of flywheels with growing rotational velocities, then also the nature of these coupling gears between subsequent flywheels is to change. Namely, when there is only a single flywheel, the gear which feeds its rotations onto an electricity generator would be a so-called „multiplying gear”. In turn, as this is explained in item #F3 of the web page „free_energy.htm”, such multiplying gears have their upper threshold limit of ratio for which the internal friction begins to cause them getting jammed. Therefore, e.g. the ratio 1:86400 would be technically very difficult to accomplish in multiplying gears. However, when we deal with two flywheels, each one of which is self-propelled by the Coriolis effect, then the coupling gear which regulates their mutual rotations looses its character of a multiplying gear. Thus the ratio of it can be of any large value (even która reguluje ich wzajemne prêdkoœci traci swój larger than 1:86400), and the coupling gear is still going to work without getting self-jammed. Therefore in such a cascade of self-propelling flywheels, the rotational velocity at the exit which become capable of an effective propelling of an electricity generator, probably can be accomplish already in cascades composed of just two or three flywheels.
       To summarise these deductions, the actual building the single perpetually rotating flywheel described before would only be a beginning, not the conclusion. This is because such building creates opportunity to learn attributes and behaviours of such flywheels – as before NO one researched these characteristics. In turn this learning opens a possibility to build entire systems of such flywheels, which systems can be subjected to further improvements that are to increase their energy yields. Thus the second step after the first such flywheel is build, is to redesign it into e.g. a gyroscopic system and a cascade system. Such a system is to be composed of several well-balanced flywheels, the rotation of which would propel itself, and which would mutually increase their momentum of inertia and their rotational velocity (and thus also their energy yield). What even more interesting, these increasingly faster spinning componential flywheels could be designed in such a manner that they would constitute rotors of electricity generators. In this manner it would become possible to increase the energy yield of the „perpetual motion” principle described here, and perhaps even transform this principle into a principle of technically viable generator of free energy.
Above descriptions of the flywheel which perpetually rotates propelled with the „Coriolis effect” „sonic boiler” originally are presented in item #F1 from the web page named „free_energy.htm”, update of 3 March 2008, or later. Briefly the same flywheel was summarized in item #F4.1 from the web page „wszewilki_jutra_uk.htm”, update of 27 February 2008, or later. The web page „free_energy.htm” should be available from following addresses – if it was not sabotaged in there by evil powers that recently rampage over the internet.

http://bible.webng.com/free_energy.htm
http://energy.atspace.org/free_energy.htm
http://evidence.ueuo.com/free_energy.htm
http://evil.thefreehost.biz/free_energy.htm
http://fruit.sitesled.com/free_energy.htm
http://fruit.xphost.org/free_energy.htm
http://god.ez-sites.ws/free_energy.htm
http://karma.freewebpages.org/free_energy.htm
http://memorial.awardspace.info/free_energy.htm
http://newzealand.myfreewebs.net/free_energy.htm
http://nirvana.scienceontheweb.net/free_energy.htm
http://pigs.freehyperspace.com/free_energy.htm
http://parasitism.about.tc/free_energy.htm
http://parasitism.xphost.org/free_energy.htm
http://rubik.hits.io/free_energy.htm
http://tornado.99k.org/free_energy.htm
http://users3.nofeehost.com/devils/free_energy.htm
http://wszewilki.greatnow.com/free_energy.htm
It is also worth to know that under each address indicated above all the web pages of totalizm should be available (unless some of these web pages were sabotaged in the meantime). Thus, if someone wishes to view descriptions from any other web pages of totalizm, e.g. from web pages listed in this message, or in other messages from this blog, then in the above addresses the name „free_energy.htm” is just enough to exchange for the name of the web page that he or she wishes to view, e.g. the web page „boiler.htm”, „wszewilki_jutra_uk.htm”, „newzealand.htm”, „free_energy.htm”, „fe_cell.htm”, „malbork_uk.htm”, „evolution.htm”, „god.htm”, „bible.htm”, „text_1_5.htm”, „dipolar_gravity.htm”, „nirvana.htm”, „evil.htm”, „memorial.htm”, etc.
I should also add here that in September 2007 web sites of totalizm, as well as everything that is linked with totalizm, were subjected to a massive „anti-totaliztic” offensive. In the result of this offensive for example just deleted were over 50 sub-domains of totalizm (almost each one of these sub-domains contained all web pages of totalizm – means around 200 web pages each). A significant proportion of these sub-domains existed (and was utilized with a great success) since 2000. A list of web pages deleted then is provided at the end of the page „Menu 4” accessible from each web page of totalizm. Because of the fact that totalizm is so aggressively and brutally persecuted and destroyed by evil „serpents-UFOnauts”, this message for the security of access is also repeated at several other blogs of totalizm that contain a mirror copies of this blog, for example at following addresses:
http://www.getablog.net/totalizm
https://totalizm.wordpress.com
http://totalizm.myblog.net
http://www.newfreehost.com/weblog/?u=god

Let totalizm prevail,
Jan Pajak
#146E: The mechanical „perpetual motion” device which rotates infinitively on principles of the so-called „Coriolis effect”: – English version (polska wersja ponizej w nastepnym wpisie)
Motto: „Totalizm teaches, that our physical world was intentionally created in such a manner, that ‚everything that humans can think of, humans can also accomplish’ – only that someone must firstly find a manner how to realise it.” (See subsection #I5.4.2 from volume 5 of monograph [1/5].)
       If an excellently balanced heavy flywheel with good bearings is positioned so that its axis of rotation is parallel to the axis of the Earth’s rotation, then the Earth is to revolve in relation to this flywheel, while the so-called „Coriolis effect” is to maintain the flywheel in a motionless position in relation to the rest of the universe (e.g. in relation to the entire Solar system). In the result, for a witness who stands on the Earth next to this flywheel, the wheel is going to behave like a „perpetual motion” device which makes one revolution per each day (or a revolution by 15 degrees each hour). Thus, if someone places a marker on the circumference of such a flywheel, then its perpetual rotations can be noticed visually even without the use of any gearbox which would multiply the speed of its slow rotational motion. This flywheel is also able to generate a small amount of the thrust torque. This thrust torque is equal to the momentum of inertia of the wheel itself, minus the momentum of friction on its bearings, and minus the drag momentum caused by imperfections in the gravitational balancing of the flywheel and in positioning of the axis of rotation perpendicularly to the Earth’s axis of rotation. Thus, the thrust torque that is generated by this flywheel is able to generate small amount of useful energy, e.g. small amount of electricity.
       Such a heavy flywheel with good bearings is to constitute a most simple for constructing, although highly illustrative kind of perpetual motion (PM) device that generates mechanical energy in the form of everlasting rotational movement. As such, it is going to have an immense historical significance. It will also generate a breakthrough in the human thinking about generators of free energy and about ideas of „perpetual motion”. After all, it will prove that both, such generators of free energy, as well as perpetual motion devices, are possible to be build after all, and in fact they generate energy completely for free. In this way the flywheel is going to disclose the intentional misleading hidden behind claims of the official human science that such devices can never be build.
       In 2004 I visited a tower from the Basilica in Frombork (Poland). This tower is famous because it was in it that the Polish astronomical genius, Miko³aj Kopernik (Nicolas Copernicus) used to work. During the time of my visit, this tower was turned into a museum of the physical-astronomical character. An exhibit from this museum that especially attracted my attention was a massive pendulum which illustrated the action of so-called „Coriolis effect”. Namely, the pendulum was made to swing infinitively. However, apart from the swinging motion, it also displayed the rotary motion. The rotational velocity of this rotary motion amounted to just one rotation per day. In order to sustain its swinging, the pendulum was continually supplied with energy impulses. But it did NOT receive any energy to sustain its rotary motion. This means, that the rotary motion was sustained by the energy that it received from the „Coriolis effect”. In other words, that pendulum from the tower in the Frombork’s Basilica was a first prototype that illustrated the principle of the perpetually rotating flywheel described here. Only that, because this pendulum carried out two kinds of motion simultaneously, it make impossible the interception of energy from it, that was supplied by the Coriolis effect. But the flywheel described here makes possible, and even easy, the interception of this energy. Also the flywheel does NOT require any energy supply. Thus in fact it is a good example of a so-called „perpetual motion” (PM) device.
       On the basis of that pendulum from Frombork, which rotated continually just by itself upon the action of the Coriolis effect, already now we can conclude, that the mechanical „perpetual motion” (PM) described here must also work in practice. After all, the action of the Coriolis effect is confirmed on countless number of cases, not just only on the case of that pendulum from Frombork. Unfortunately, the PM described here is not much useful in practice as a source of free energy, because of its small thrust torque and highly awkward rotational velocity that amounts to just a single rotation per day. (The thrust torque of the flywheel described here is relatively small, because equal to just a momentum of inertia of it, minus the momentum of friction on its bearings, and minus the breaking momentum which originates from imperfections in the balancing and in the precision of pointing the axis of rotation.) However, in spite of its small practical usefulness, this flywheel still is worth of building, because of its awareness, psychological, educational, and inspirational values.
       Of course, as every other „perpetual motion” device, such a flywheel rotated by the action of the Coriolis effect will have a huge value as a technological curiosity and as an illustration for the correctness of the idea for this kind of devices. After all, its everlasting rotations by 15 degrees each hour, and by 1 rotation each day, will prove to everyone who is to see it, that perpetual motion devices can be build after all, and that our science to date, as usual, also this time was at wrong when it declared categorically that such devices will NEVER work.
       Just for this reason I personally suggested that such a perpetually rotating flywheel is installed in the future museum of free and renewable energy in Wszewilki (or in Milicz). The organising such a museum I am lobbying inhabitants of these settlements for quite a time. My proposals as to what generators of free energy should be exhibited in such a museum from Wszewilki, are described in item #F4.1 from the update of the web page „wszewilki_jutra_uk.htm” (about dreams of better future for the village of Wszewilki) dated 27 February 2008, or later.
       The usefulness of the flywheel described here as a highly educational exhibit for any possible museum, is also increased by the fact, that this flywheel can be build by local tradesmen for practically every museum. Thus, with a bit of local patriotism, such a flywheel can be completed in there either completely free of charge as the altruistic deed of local tradesmen, or just for a small cost that would cover prices of materials.
       The construction of the perpetually rotating flywheel described here is relatively simple. It suffices to recover from a junkyard an old flywheel together with the permanent axel to which it is attached, or retrieve any heavy wheel (with an axel) that is well balanced – e.g. a large railway wheel. Then this flywheel needs to be supplied in good bearings so that its axel is parallel to the axis of Earth’s rotation. For this, the axis of its rotation should be positioned exactly along the line of geographical south-north, and also this axis should be slanted vertically by the angle that is equal to the geographical latitude of the place in which this flywheel is to be assembled. For example, for such flywheels assembled on the territory of Poland, the angle of their slanting towards horizontal should amount somewhere between 49 and 55 degrees – depending on the exact location of the place in which someone is going to build it. After it is assembled, the flywheel needs to be check for its precise balancing in the angular positioning, and for the easiness of its rotations. If it is balanced precisely and easily rotating, any marking made on its circumference is going to indicate that this flywheel in fact does rotate all by itself by one rotation per each full day.
       For a better illustration of the actual rotations of the flywheel described here, the axel that rotates together with it can be coupled with a multiplying gearbox for a „flywheel pointer”. The function of such a multiplying gearbox can be performed by a mechanism that is dismantled from an old and unused clock. This is because mechanisms of such old clocks frequently were constructed for the gear ratio 1:1440 (1440 = 24×60). Thus, when a single rotation per day is supplied at the input to the multiplying gearbox with such a ratio, then one rotation per minute is received at the exit from it. This means that the „flywheel pointer” (preferably of a large size) attached to the exit from such a multiplying gearbox, is going to rotate with the speed clearly noticeable to human eyes. The rotational velocity of such a „flywheel pointer” would be equal to the speed with which in present watches rotates the pointer of seconds.
       Of course, the biggest challenge for the builders of such flywheel would be to transform it into an electricity generator. After all, in order to be able to operate as an electricity generator, it needs to be supplied into a gearbox which its just one revolution per day would multiply into some useful rotations which would be able to generate electricity. Fortunately, this challenge is purely theoretical, as the energy efficiency of such a single flywheel is so small, that it is NOT worth of effort to turn it into an energy generator. Thus such a change into an electricity generator would only have a value as a proof which documents to everyone that this flywheel is in fact able to generate free electricity – in spite that the official human science claimed categorically that such generation of free electricity is absolutely impossible. But the amount of electricity that it would generate in practice would be too small in order to justify its practical application for an industrial scale. However, the illustrative proving that this flywheel generates some free electricity after all, would have an inspiring value. This is because it would motivate people to seek other principles of operation for perpetual motion devices, which would be able to generate much higher amounts of electrical energy.
       In order to enable such a perpetually rotating flywheel to propel a small generator of electricity, a large multiplying gearbox would need to be coupled with the axel of it. This gearbox would need to multiply one rotation per day of the flywheel, into at least one rotation per second of the rotor of the electricity generator. This means that such a gearbox would need to have the multiplying gear ratio of at least 1:86400. This in turn means, that if such a multiplying gearbox is based on mechanical principles of operation – as this was done in old clocks, then only its loses for friction would consume an entire thrust torque generated by the flywheel. Also in practice such a gearbox would typically self-jam and thus it would be unable to carry out the motion because of its inner friction. In turn a possible hydraulic device would have larger leaks than the output from the pumping efficiency generated by the motion of this flywheel.
       To summarise, although as a useful source of free energy, the single flywheel working in the way described above is rather of no much use. However, in my opinion it still has a revolutionary significance. After all, it illustratively proves that in fact there are principles of operation which are able to supply perpetual motion to people for free. Thus the flywheel constitutes a visual proof for the correctness of the idea of perpetual motion devices. Furthermore, it supplies a starting device for future working out the entire systems of such flywheels which are to yield energy more efficiently. As such, the single flywheel described here has immense significance as a historical and museum curiosity, as a teaching aid, as a source of inspiration which is to drive further searches for more useful principles of operation for perpetual motion devices, and as a breakthrough in our thinking.
       In order the flywheel described here works as a perpetual motion device, its axis of rotation must be exactly parallel to the axis of rotation of the Earth. This requirement, although very elementary, in fact make impossible an accidental invention of this flywheel. After all, practically almost all flywheels which people constructed so-far, have their axes of rotation positioned horizontally. So in spite that people built many of such flywheels already in the first stage of implementation of steam and combustion engines, in fact almost none of them worked in the positioning that would convert it into a perpetual motion device. After all, in order any of these flywheels with a horizontal axis of rotation worked as a perpetual motion device, it would need to be located exactly on the equator of the Earth, and its axis of rotation would need to be pointed exactly along the line south-north. However, along the Earth’s equator almost NO civilisation centres are located in which first steam or combustion engines with flywheels would be placed. So users of these first engines had NO opportunity to accidentally witness work of such flywheels as perpetual motion devices. Thus in fact humanity never obtained a chance for an accidental discovery that flywheels can work as perpetual motion devices.
       In item #B1.2 of the web page „free_energy.htm” it was explained, that in order „perpetual motion” devices can be transformed into generators of free energy, one needs to form in them the „energy feedback loop”. This feedback would loop a part of energy which they generate at the exit, feeding this energy back into their entrance, thus „multiplying” their entire energy yield. In a single flywheel described before the formation of such a feedback is impossible. But if one combines together an entire system of such flywheels, which is to contain several of them, then the „energy feedback loop” can be accomplished in this system. Let us now consider how this can be achieved.
       The momentum of inertia is a first quantity which allows us to form easily the „energy feedback loop” in a larger system of flywheels similar to the flywheel described before. In turn, as we know from item #F1 above, this momentum of inertia influences linearly the amount of energy generated by a given flywheel or by a given system of flywheels. Means, the higher the momentum of inertia, the more free energy one is able to harvest from it. In turn the increase the momentum of inertia can be accomplished on two different manners. One of these manners depends on the increase of the mass of a given flywheel – and this is rather a clumsy manner. After all, in order to generate a reasonable amount of useful free energy such a flywheel would need to be massive and weight many tons. Another, more „elegant” manner of the increase of its momentum of inertia depends on the use of so-called „gyroscopic effect”. In turn this effect is to increase the momentum of inertia of the flywheel discussed here, if this flywheel instead of being constructed as a single massive wheel, is rather build in a segmented manner as a system of several smaller flywheels which mutually increase their rotational velocity. (We must remember that in fact the Earth rotates in relation to these wheels, not these wheels rotate in relation to the Earth.) Of course, such a gyroscopic system still must be perfectly balanced, so that it will NOT form a gravitational momentum of resistance. What even interesting, with such a segmental design of the well-balanced flywheel described here, the rotational velocity of its composite wheels (the ones which generate the gyroscopic effect) can be forwarded to their input through the energy feedback loop from their output. Thus such a systems will „multiply” by itself the energy that it is to generate.
       Another quantity which could also make it possible to form „energy feedback loop” in the entire system of flywheels, is the capability to intercept the Coriolis effect during the rotations. Namely, the behaviour of water in fast rivers suggests that the Coriolis effect is able to act on flywheels that already rotate. (Of course, whether in reality this happens, it is going to be revealed by experiments after constructing first such flywheels.) This practically means, that several flywheels could be coupled together into cascades via coupling gears. In these cascades, the first flywheel, which would be the flywheel described before – that revolves once per day, would propel via a coupling gear a next flywheel that would rotate much faster, but still would intercept the Coriolis effect, and this one in turn would propel still another flywheel via a coupling gear, etc., etc. In the result, the last flywheel in this cascade, would already have the rotational velocity able to propel effectively an electricity generator, while the thrust momentum of it would be equal to the sum of thrust momentums of all flywheels of the cascade. Thus, such a cascade would provide the velocity feedback loop. Means it would make possible to harvest the output velocity from a first flywheel and feed it as an input velocity of a next flywheel.
       If the Coriolis effect allows to form such cascades of flywheels with growing rotational velocities, then also the nature of these coupling gears between subsequent flywheels is to change. Namely, when there is only a single flywheel, the gear which feeds its rotations onto an electricity generator would be a so-called „multiplying gear”. In turn, as this is explained in item #F3 of the web page „free_energy.htm”, such multiplying gears have their upper threshold limit of ratio for which the internal friction begins to cause them getting jammed. Therefore, e.g. the ratio 1:86400 would be technically very difficult to accomplish in multiplying gears. However, when we deal with two flywheels, each one of which is self-propelled by the Coriolis effect, then the coupling gear which regulates their mutual rotations looses its character of a multiplying gear. Thus the ratio of it can be of any large value (even która reguluje ich wzajemne prêdkoœci traci swój larger than 1:86400), and the coupling gear is still going to work without getting self-jammed. Therefore in such a cascade of self-propelling flywheels, the rotational velocity at the exit which become capable of an effective propelling of an electricity generator, probably can be accomplish already in cascades composed of just two or three flywheels.
       To summarise these deductions, the actual building the single perpetually rotating flywheel described before would only be a beginning, not the conclusion. This is because such building creates opportunity to learn attributes and behaviours of such flywheels – as before NO one researched these characteristics. In turn this learning opens a possibility to build entire systems of such flywheels, which systems can be subjected to further improvements that are to increase their energy yields. Thus the second step after the first such flywheel is build, is to redesign it into e.g. a gyroscopic system and a cascade system. Such a system is to be composed of several well-balanced flywheels, the rotation of which would propel itself, and which would mutually increase their momentum of inertia and their rotational velocity (and thus also their energy yield). What even more interesting, these increasingly faster spinning componential flywheels could be designed in such a manner that they would constitute rotors of electricity generators. In this manner it would become possible to increase the energy yield of the „perpetual motion” principle described here, and perhaps even transform this principle into a principle of technically viable generator of free energy.
Above descriptions of the flywheel which perpetually rotates propelled with the „Coriolis effect” „sonic boiler” originally are presented in item #F1 from the web page named „free_energy.htm”, update of 3 March 2008, or later. Briefly the same flywheel was summarized in item #F4.1 from the web page „wszewilki_jutra_uk.htm”, update of 27 February 2008, or later. The web page „free_energy.htm” should be available from following addresses – if it was not sabotaged in there by evil powers that recently rampage over the internet.

http://bible.webng.com/free_energy.htm
http://energy.atspace.org/free_energy.htm
http://evidence.ueuo.com/free_energy.htm
http://evil.thefreehost.biz/free_energy.htm
http://fruit.sitesled.com/free_energy.htm
http://fruit.xphost.org/free_energy.htm
http://god.ez-sites.ws/free_energy.htm
http://karma.freewebpages.org/free_energy.htm
http://memorial.awardspace.info/free_energy.htm
http://newzealand.myfreewebs.net/free_energy.htm
http://nirvana.scienceontheweb.net/free_energy.htm
http://pigs.freehyperspace.com/free_energy.htm
http://parasitism.about.tc/free_energy.htm
http://parasitism.xphost.org/free_energy.htm
http://rubik.hits.io/free_energy.htm
http://tornado.99k.org/free_energy.htm
http://users3.nofeehost.com/devils/free_energy.htm
http://wszewilki.greatnow.com/free_energy.htm
It is also worth to know that under each address indicated above all the web pages of totalizm should be available (unless some of these web pages were sabotaged in the meantime). Thus, if someone wishes to view descriptions from any other web pages of totalizm, e.g. from web pages listed in this message, or in other messages from this blog, then in the above addresses the name „free_energy.htm” is just enough to exchange for the name of the web page that he or she wishes to view, e.g. the web page „boiler.htm”, „wszewilki_jutra_uk.htm”, „newzealand.htm”, „free_energy.htm”, „fe_cell.htm”, „malbork_uk.htm”, „evolution.htm”, „god.htm”, „bible.htm”, „text_1_5.htm”, „dipolar_gravity.htm”, „nirvana.htm”, „evil.htm”, „memorial.htm”, etc.
I should also add here that in September 2007 web sites of totalizm, as well as everything that is linked with totalizm, were subjected to a massive „anti-totaliztic” offensive. In the result of this offensive for example just deleted were over 50 sub-domains of totalizm (almost each one of these sub-domains contained all web pages of totalizm – means around 200 web pages each). A significant proportion of these sub-domains existed (and was utilized with a great success) since 2000. A list of web pages deleted then is provided at the end of the page „Menu 4” accessible from each web page of totalizm. Because of the fact that totalizm is so aggressively and brutally persecuted and destroyed by evil „serpents-UFOnauts”, this message for the security of access is also repeated at several other blogs of totalizm that contain a mirror copies of this blog, for example at following addresses:
http://www.getablog.net/totalizm
https://totalizm.wordpress.com
http://totalizm.myblog.net
http://www.newfreehost.com/weblog/?u=god

Let totalizm prevail,
Jan Pajak
P.S. The subject of the „perpetual motion flywheel” described here, as well as other subjects related to it, is already being discussed on various Google discussion groups. For example:

(1) The discussion of this PM flywheel in the Polish language is carried out at the internet addresses: http://groups.google.com/group/pl.sci.fizyka/browse_thread/thread/a500a3b16bd0c3f3/2943e9fc003e6a49#2943e9fc003e6a49

(2) The discussion of this PM flywheel in English, is carried out at addresses: http://groups.google.com/group/sci.physics/browse_thread/thread/1ec304a0b8533c5a/1bcfda7cc9e40aa6?lnk=raot#1bcfda7cc9e40aa6

Advertisements

%d bloggers like this: